7
Picture 2. Design of AIRPELL DEFRO HOME AIRPELL.
1 - pellet container handle, 2 - doors, 3 - window panel with display,
5 - door handle, 6 - body of stove, 7 - deflectors made of vermiculite,
8 - ash-pan, 9 - burner, 10 - DGP, 11 - plug of alternative outlet of flue,
12 - flue, 13 - air inlet socket, 14 - air intake, 15 - plug of alternative
outlet of DGP, 16 - power switch, 17 - supply socket 230V, 18 - pellet
container, 19 - feeder mechanism, 20 - electronic controller of stove,
21 - cover of cleaning hole, 22 - flue gas fan, 23 - air fan, 24 - DGP
system fan.
4.2.
TECHNICAL DATA
Table 1
.
Technical data of AIRPELL stove.
Parameter
Unit
value
Nominal power
kW
8.0
Heating power range
kW
3,5-8,0
Nominal
efficiency
1
%
93,3 (94,3)
Seasonal energy efficiency
%
88.7
CO emission for 13% O
2
%
0,010 (0,017)
Flue gases temperature
1
°C
82.1
(50.7)
Weight
2
kg
146
Flue gas stream for nominal power
g/s
8.2 (6.2)
Minimum draught at rated power
Pa
12
Flue size
mm
80
Supply voltage
V
230
Maximum power consumption
W
583
Power consumption for nominal power
1
kWh/h
0,125 (0.065)
Fuel consumption
1
kg/h
1.9
(0.8)
Fuel tank capacity
kg
16
Fuel
3
the pellet with a diameter of
6 mm -
1)
Values for nominal power 3.5 kW are given in brackets.
2)
Device weight depends on the selected design version and its equipment.
3)
The stove is factory adapted for combustion of pellet with a diameter of 6
mm, pellet with a diameter of 8 mm may be used after changes of settings in
the controller performed by the authorized service
.
The combustion process in stove fired with pellet is adjusted by an elec-
tronic controller (4) controlling operation of the igniter, feeder and fans
based on setpoints and measured temperature.
A detailed description of construction, operation and
work of the electronic controller and fan is included in
the operating manuals enclosed to this documentation.
Recommendations of operating manual of controller
and fan should be unconditionally observed.
7
6
8
9
10
15
11
14
12
13
16
17
20
21
18
19
24
22
23
