Defro Home AIRPELL 8, Руководство по эксплуатации

Страница: 28 / 32

28
DECLARATION OF PERFORMANCE
No. DHAIRPELL-01/2018
1. Identification code of product-type KOM-DHAIRPELL
2. Building product (name, type, series) Product name: Dry stove DEFRO HOME AIRPELL
Serial number: See rating plate.
3. Application of building product Room heater fired with solid fuel in the buildings
4. Name and contact address of the manufacturer DEFRO Spó ł ka z ograniczon ą odpowiedzialno ś ci ą Sp. k.
00-403 Warszawa, ul. Solec 24/253
Manufacturing plant:
26-067 Strawczyn, Ruda Strawczy ń ska 103A
5. Name and contact address of authorised representative Not applicable
6. System for assessment and verification of constancy of performance
of building product
System 3
7. Name and identification number of notified body participating in the
assessment of the constancy of performance of the building product The Oil and Gas Institute - National Research Institute, Notified Body
no. 1450, has made an assessment of performance based on the tests
in system 3 and had issued test reports no. 3874 A7 19 and 3874 B7
19.
DECLARED PERFORMANCE
Essential characteristics Performance Technical specification
CO emission in combustion products
0.010% (0.017%)
1
(13% O
2
)
115 mg/m
3
(201 mg/m
3
)
1
(13% O
2
)
PN-EN 14785:2009
OGC emission in combustion products 7 mg/m 3 (13 mg/m 3 ) 1 (13% O
2
) Commission Regulation (EU) 2015/1185
NOx emission in combustion products 57 mg/m
3
(59 mg/m
3
)
1
(13% O
2
) Commission Regulation (EU) 2015/1185
PM emission in combustion products 17 mg/m
3
(16 mg/m
3
)
1
(13% O
2
) Commission Regulation (EU) 2015/1185
Temperature of external surfaces 5.1, 5.2, 5.3, 5.4 PN-EN 14785:2009
Electric safety 5.9 PN-EN 14785:2009
Max. permissible work pressure not applicable
Mechanical strength no leaks and permanent deformations PN-EN 14785:2009
Flue gases temperature 82.1°C (50.7°C) 1 PN-EN 14785:2009
Thermal power/Energy efficiency
8.03 kW / 90,93%
3.55 kW / 90,93%
PN-EN 14785:2009
Primary fuel pellet operating manual
1)
Values for nominal power 3.55 kW are given in brackets.
Performance of the product specified in point 1 and 2 are in compliance with the performance declared in point 8.
DECLARED PERFORMANCE
This declaration of performance has been issued on the sole responsibility of the manufacturer specified in point 4.
Signed on behalf of the manufacturer by:
..................................................................................................................................................................................................................................
(name and position)
.............................................. ...............................................
(location and date issued) (signature)
Robert Dziube ł a – CEO
Warszawa, 19.11.2019