Defibtech Lifeline ARM Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 45

background image

To replace the Battery Pack during operation:

If the Battery Pack charge becomes very low during use, the Warning Indicator will flash and the
Battery Pack Status Indicator shows one lit LED. If this happens, there are two options:

Option 1:

Swap with a sufficiently charged spare Battery Pack.

•

Push Pause on the User Control Panel to temporarily stop compressions.

•

Press the Battery Pack Release to quickly eject the depleted Battery Pack and remove it.

•

Insert the charged spare Battery Pack.

•

Wait for the Pause LED indicator to illuminate.

•

Restart compressions by pushing the Pause button again or one of the Run buttons.

If the Battery Pack change takes over 15 seconds, the Piston will automatically retract when
the spare Battery Pack is inserted and the start position will have to be set again .

Option 2:

Connect the Lifeline ARM to an external power source by connecting the AC

Adapter to the external input jack of the Compression Module. The Battery Pack
must always be installed in the Compression Module to operate the device, even
when powered by the AC Adapter.

Trainer Tip:

Demonstrate how to remove and replace the Battery Pack, and review the

Battery Pack Indications and Alerts on the User Control Panel. Also point out the location

of the external input jack on the Compression Module.

The Stabilization Strap and Other Accessories

The Stabilization Strap holds the Lifeline ARM device securely in the correct position in relation
to the patient. It snaps into the Stabilization Strap connectors located on the Frame.

Trainer Tip:

Point out the location of the Stabilization Strap connectors on the Frame.

Other accessories include the Patient Interface Pad, AC Adapter, Quick Reference Guide,
and User Manual. Available options include: a USB cable, Wrist Straps, spare Battery Pack,
Patient Interface Pads (package of 3) and a Battery Charging Station.

RAC-A1515EN-BA

20

«
...
18
19
20
21
22
...
»

Содержание Lifeline ARM














































Отзывы:

Нет отзывов

Похожие инструкции для Lifeline ARM

Бренд: Gardner Denver Страницы: 60

Бренд: Campbell Hausfeld Страницы: 12

Бренд: Campbell Hausfeld Страницы: 24

Бренд: Parkside Страницы: 64

Бренд: MSW Страницы: 96

Бренд: Laplante Страницы: 64

Copeland 4MI-30X

Бренд: Emerson Страницы: 44

Бренд: Mi-T-M Страницы: 42

Бренд: XPOtool Страницы: 8

Бренд: NORAUTO Страницы: 49

Frick QUANTUM LX

Бренд: Johnson Controls Страницы: 140

HL 360/50 compact

Бренд: Airpress Страницы: 64

Бренд: Airmax Страницы: 2

Бренд: airmaster Страницы: 24

Бренд: AIRMAC Страницы: 56

Бренд: XTM Страницы: 2

Бренд: J.E. Adams Страницы: 16

Бренд: Durr Dental Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды