Reviewing Initial Assembly
To quickly assemble the Lifeline ARM, follow this sequence:
1.
Attach the Frame to the Backboard.
2.
Insert the Compression Module into the receptacle
of the Frame. Rotate the Module until it is in line
with the Frame and snaps into place.
3.
Check that the Patient Interface Pad (PIP) is
installed. If not, attach it to the distal end of the
Piston by pressing the pad onto the Piston until it
snaps into place, rotating pad if necessary.
Trainer Tip:
Emphasize the importance of making sure a Patient
Interface Pad (PIP) is installed on the Compression Module.
4.
Insert a fully charged Battery Pack into the
opening in the side of the Compression Module.
Before using the Lifeline ARM, always check to be sure it is completely assembled and that all
components are present and functional. Check the Battery Pack to be sure it is fully charged.
The following section, “
Learning the Deployment Sequence
,” provides a more detailed view
of the assembled components and how they are used during a rescue.
Trainer Tip:
Before moving on to the next section, ask if anyone has
questions or concerns.
2. G
ro
up T
ra
in
in
g S
es
sion
s
RAC-A1515EN-BA
21
Содержание Lifeline ARM
