Defibtech Lifeline ARM, Руководство для тренера

Страница: 36 / 45

7. Select compression protocol and start compressions.
Essential elements:
• Remind students that they have the choice of running compressions with or without breaths.
Show how to start Run Continuous (top button) on the User Control Panel, then Run with
Breaths (bottom button).
• Show how to temporarily stop compressions, if needed, by pressing the Pause Button, and
to restart compressions by pressing either Pause again or the appropriate Run compressions
button.
8. Apply the Stabilization Strap.
Essential elements:
• Show how to lift the patient’s head, place the strap behind the neck, and connect to the Frame
by pushing the clips into the strap connectors. They should hear an audible click.
• Show how to adjust the strap length to maintain the correct position of the device over the
patient’s chest.
• Remind students that if the device is not correctly positioned, they should loosen the
Stabilization Strap and readjust.
• Show how to position and attach Wrist Straps (if used).
9. Change the Battery Pack.
Essential elements:
• Show how to push Pause to temporarily stop compressions, then eject and replace the existing
Battery Pack with a spare charged Battery Pack.
• Remind students that the Battery Pack will operate in either orientation (with the contacts
toward the unit).
• Remind students that the Battery Pack must always be inserted into the Compression Module
even when using an external power source.
RAC-A1515EN-BA
36