13
DAC-515E-EN-BF
6 Remote Control Commands
The Remote Control can be used to change the behavior of the Trainer AED
at any time while the unit is powered on. The remote will have no effect on
a Defibtech DDU-100 Series AED. The following functions can be performed
using the Remote Control keys:
•
OFF
- turns the Trainer AED off.
•
PADS
- simulates disconnected pads.
•
NSR
- simulates a Normal Sinus Rhythm (typically used once pads
have been applied to the training dummy).
•
VFIB
- simulates Ventricular Fibrillation (typically used once pads
have been applied to the training dummy).
•
MOTION
- simulates a cardiac rhythm corrupted with excessive
motion artifacts (typically used once pads have been applied to the
training dummy).
•
1 - 6
- instantly changes the Trainer AED to the corresponding
training scenario.
Note:
Buttons 7 - 9 do not have any
corresponding training scenarios.
•
VOLUME UP
- increases the volume of the Trainer AED’s voice
incrementally (up to a maximum limit).
•
VOLUME DOWN
- reduces the volume of the Trainer AED’s voice
incrementally (down to a minimum limit).
•
PAUSE
- alternately suspends and resumes Trainer AED operation.
Once paused, the Trainer AED will only respond to the PAUSE key
of the Remote Control.
