12
DAC-515E-EN-BF
5.5 Programming the Default Scenario
The Trainer AED can be re-programmed to start in any of the six available
scenarios when powered on.
5.5.1 Programming the Default Scenario without the Remote Control
If the user does not have a Remote Control, the processes of selecting training
scenarios and programming the Default Scenario are the same. The Trainer AED
will retain the last scenario selected and start with that scenario the next time it
is powered on.
Use the following procedure to select a training scenario when a Remote
Control is not available:
1. Start with the Trainer AED off.
2. Hold the Shock button down while turning the unit on.
3. The unit will announce “Training Mode n,” where “n” is the number of
the current Default Training Scenario.
4. Release the Shock button.
5. Push the Shock button repeatedly to advance through the available
training scenarios until the desired scenario is reached (the Trainer AED
will announce each scenario number in sequence).
Note:
It is OK to push the Shock button rapidly (without waiting for the
numbers to be announced) in order to advance more quickly.
6. Turn the Trainer AED off. The Trainer AED will now operate in the
chosen training scenario until the Default Scenario is reprogrammed.
5.5.2 Programming the Default Scenario with the Remote Control
Note:
When performing training using the Remote Control, Defibtech
recommends programming training scenario #6 (pads not applied) as the Default
Training Scenario. This will allow the instructor to manually select rhythm
simulations or other training scenarios as desired using the Remote Control.
To program the Default Scenario using the Remote Control:
1. Start with the Trainer AED off.
2. Power on the Trainer AED.
3. Press and release the
Shift
Key on the Remote Control.
4. Press and release the
Alt
Key on the Remote Control.
5. Press the number key corresponding to the desired training scenario
(#1 through #6).
6. The Trainer AED will announce “Training Mode ‘n’” where ‘n’
corresponds to the numeric key that was pressed.
The Default Training Scenario has now been programmed and the Trainer AED
will start using this training scenario every time the unit is turned on.
Note:
The Trainer AED will announce “Training Mode” each time it is turned on
to indicate that it cannot be used to defibrillate a patient.
