Defender DFDVR2, Инструкция по эксплуатации

Страница: 25 / 75

DFDVR2 23
4-5-1: TCP/IP CONFIGURATION
IP SETUP
1. MAC ADDRESS
- Shows the DVR’s MAC address. This is a unique address that is
assigned to your DVR. You cannot change the MAC address. Please write it down.
2. DHCP MODE
- Specifies whether the DHCP mode is set to Manual or Automatic. When
DHCP is set to Automatic, you can not change any IP settings in this page. To turn off
the DHCP automatic detection, exit this page and go to DHCP SETUP to change
the setting.
3. IP PORT
- Set up IP Port information.
4. IP ADDRESS
- Set up the DVR’s IP address.
5. GATEWAY
- Set the GATEWAY information.
6. SUBNET
- Set the SUBNET MASK information.
DDNS SETUP
1. DDNS ENABLE
- Turn ON and OFF the DDNS function.
2. DNS SERVER
- Set up the DNS Server’s IP address. Use the Mouse Wheel to change
this value.
3. INTERVAL
- Set up an interval for the DVR to report its IP address to the DDNS server
automatically. (D- day / H- hour / M- minute). Use the mouse wheel to change the value.
4. REGISTER
- Connect to the DDNS server and register the DVR information to the
server. Click REGISTER to start the registration process.
5. DNS STATUS
- Indicates the current status of the DDNS connection.
6. IP ADDRESS
- Indicates the current IP address recorded in the server.
7. IP PORT
- Indicates the current IP port recorded in the server.
8. REMAIN TIME
- Indicates the remaining time to report to the server.
9. LAST REGISTRATION DATE
- Indicate the time of the last registration.