Defender DFDVR2, Инструкция по эксплуатации

Страница: 41 / 75

DFDVR2 39
Step 5:
Select In the Add New Port Forward Entry screen, proceed as follows:
- In the Template field, select Custom
- In the Name field, select DVR
- In the Port Start field, enter the first number of the port you need to port forward
(e.g. 50000).
- In the Port End field, enter the ending port number (e.g. 50000).
- In the LAN IP Address field enter the IP address (192.168.0.1).
- Check the Enable button
- Finally, click the Add button, followed by selecting the Apply button.
Port forwarding is now complete for the Motorola router!
6-2-9: TWO-WIRE ROUTER
The port forwarding process may vary depending on the brand and model number of the
router being used. Port forwarding of a router is required to allow user access to your DVR.
Regardless of the Two-Wire Router being used, the process of port forwarding is similar. You
will need to enable the ports by locating the port range forwarding screen (Note: in many two
wire systems, it is located in the firewall setting). The set up instruction outlined below is an
example of port forwarding a Two-Wire Router using the Two-Wire Model 1500000G.
Step 1:
Open your web browser. Enter the router IP address 192.168.1.254 in the address bar,
followed by pressing Enter.
Step 2:
Select the Firewall Tab.
Step 3:
Select Firewall Settings.
Step 4:
In the Edit Firewall Settings tab, select add a new user defined application.
Step 5:
- In the Edit Firewall Settings proceed as follows:
- In the Select a Computer field, select DVR.
- In the Edit a Firewall Setting, check the Allow Individual Applications box and highlight
the DVR application which you just created. Click Add.
Step 6:
- Select the Back button to return to the Edit Firewall Screen
- In the Edit Firewall Settings proceed as follows:
- In the Application Name field, type DVR.
- In the Protocol selection, select TCP.
- In the Port field, enter in the first box, the first number of the port you need to port
forward (e.g. 50000) and in the second box the ending port number (e.g. 50000).
- Select the Add Definition button.
- Finally select the Done button at the bottom of the screen.
Port forwarding is now complete for the Two-Wire Router!