Defender 21101, Инструкция по эксплуатации

Страница: 71 / 84

71
d
eViCe
The DEVICE tab allows you to view hard drive information such as HDD status and available space. You can also set the
overwrite setting. This is a useful menu when troubleshooting your DVR.
HDD
hdd options are:
• HDD Status:
Displays the current operating status of the hard drive. If the hard drive is functioning normally
it will display OK.
• Avail Space: Tells you how much space is available to record on the HDD.
• Total Space:
Tells you the total amount of space on your HDD.
• Available Time : Amount of remaining time available to record.
overwrite
When the HDD has overwrite enabled, it will record over the oldest footage once the HDD is full instead of stopping the
recording. This way the DVR is always recording. If you want to stop recording when the HDD is full, set overwrite
to Close.
To enable/disable ovErwriTE mode:
1. Select the drop down menu beside OVERWRITE.
2. Select either AUTO to turn overwrite on, (you can also set the DVR to overwrite for just a few hours or days) or
choose CLOSE to turn overwrite off.
3. Select SAVE to save settings.
PTZ
PTZ setup allows you to input information for a PTZ camera. (PTZ cameras not included). The information must be
entered in the DVR to ensure compatibility with your PTZ camera.
To input the PTZ information:
1. On the PTZ setup menu, select the channel the PTZ camera(s) are connected to. Input the proper information for
your PTZ camera.
2. The information you need to select will be specified in the PTZ manufacturer manual.
3. Choose to enable/disable cruise mode for the PTZ camera. Once all the correct information is entered into the DVR,
select SAVE to save settings.
ONLINE SOFTWARE