Defender 21101, Инструкция по эксплуатации

Страница: 41 / 84

41
V
ersion
t
aB
The VERSION tab allows you to view information about your DVR:
ADVANCED SETUP
m
aintain
t
aB
The MAINTAIN tab allows you to load system default settings, set up your DVR for automatic maintenance, adjust
system reboot, manually reboot the system, as well as update the system with a USB device.
Turning AuTo MAiNTENANCE on or off:
AUTO MAINTENANCE activates the AUTO REBOOT function. You
must set a schedule for AUTO REBOOT if selecting ENABLE.
1. Select the drop down box next to AUTO MAINTAIN and
select ENABLE.
2. Select APPLY to save your changes.
Auto Reboot
AUTO MAINTAIN must be enabled before setting the AUTO
REBOOT schedule.
Setting AuTo rEBooT:
1. Select the drop down box next to AUTO REBOOT, and select
how often you would like the system to reboot, daily, weekly
or monthly.
2. Click the next drop down box to select the day of the week/month you would like the system to reboot.
3. Insert a specific time to reboot in the last box on the right. (Based on a 24 hr clock).
4. Select APPLY to save your changes.
To rEBooT the dvr:
1. Click the REBOOT button.
2. A screen will appear asking for confirmation to reboot. Select OK to continue or CANCEL to quit.
3. Once prompted to reboot the DVR, the DVR will shut down and restart.
Update
A system update can be done if there is new software available for your DVR model. This should only be done if a
DEFENDER® representative recommends it.
To uPdATE system:
1. Download the upgradefiles from www.defender-usa.com and put the files onto your USB flash drive.
2. Insert the USB flash drive into the back of the DVR.
3. Click UPDATE and click OK to confirm. This may take up to 10 minutes.
4. Once the update is complete, your DVR will restart with the new software update.
Maintain Tab Screen
MAIN MENU
• Device Name
• Device ID
• Device Type
• MAC Address • Software Version
• IE Version
• Hardware Version