The easy way to install your hob
The hob must be built into the
worktop of a support cupboard. This
worktop must be at least 3 cm thick
and heat-resistant or else coated with
a heat resistant material.
Side-clearance of at least 30 cm
should be left to the right and left of
the hob. A tall cupboard or partition
too close to the hob would hinder free
movement of kitchen utensils.
If a horizontal partition is installed un-
der the hob, it is
imperative
that it is
placed between 10 and 15 cm from
the bottom of the worktop. In any ca-
se, do not keep any sprays or pressu-
rised containers in the compartment
just under the hob.
Place the hob unit into the opening in
the worktop by carefully pulling it to-
wards you.
Put the burners, caps and pan grates
back into position.
Connect the hob power cable to your
kitchen electricity supply (See
"
Electrical Connections
" for your
hob).
If you want, you can fix the hob in po-
sition on its four corners, using the
four lugs and screws provided (See
diagram).
Only use the holes provided.
Stop screwing when the lug
starts to bend.
Do not use a power screwdriver
.
F
itting recommendations (cont'd)
Mounting
pad
Worktop
49 cm
3 cm mini
30 cm mini
30 cm mini
56 cm
5,3 cm mini
70 cm mini
4 fixing holes
40
