41
To make sure that nothing can get
between the frame and the worktop,
stick the foam seal
around the
outside of the hob.
Fix in place the joint provided in the
folder before installing the hob :
1-
Remove the pan support grates,
the burner caps and heads after
checking their position.
2
- Turn the hob over and place it very
carefully over the opening in the unit
taking great care not to damage the
ignition spark qgenerators.
3
- Stick the foam seal supplied with
the appliance
around the outside of
the hob
. This seal prevents anything
getting between the glass and the
worktop.
4
- Put the burners, caps and pan
grates back into position.
I
NSTALLATION OVER A UNIT WITH DOORS
OR DRAWERS
(please see the diagram
opposite).
The installation of your hob over an
oven requires the latter to be in the
low position.
You are advised not to install your hob
over an oven for which ventilation is
not via the front.
You should leave an air inlet of 40 sq.
cm in the right or left wall of the oven
unit.
F
itting recommendations (cont'd)
Seal
Mini 4mm
Gas hob
100 mm
mini
Worktop
Mini 40 cm
2
The hob's heat-safety features
prevent it being used while it is
in pyrolysis mode.
The easy way to install your hob
