55
•
Select
the burner that you wish to use
by placing your finger squarely on the
corresponding control button
(fig. 1)
.
➡
In the display, the selected power
level
starts to flash.
•
Choose
the heating power by pres-
sing on the buttons:
➡
setting the heat
(max)
(fig. 2)
.
➡
setting the heat
(min)
(fig.3)
.
➡
setting the heat
(fig.4)
.
➡
setting the heat
(fig.5)
.
The hob turns on automatically. You can
adjust the burner’s power by pressing
the or buttons.
•
Locking:
Press the button
(Fig.6)
.
there is a beep. Hold your finger down
for about 3 seconds: You will hear 2
beeps and the light comes on.
The controls are locked, apart from the
on/off control
for the 2 burners, and
the overall stop button.
•
Unlocking:
press the control for
about 3 seconds
(Fig. 6)
.
The indicator goes out. The hob returns
to all the confirmed settings.
•
Overall stop:
You can turn off all lit
burners immediately by using the overall
stop button
. This action cancels the
locking if this had been programmed.
Using your hob in all simplicity
T
urning on the hob and adjusting the power setting
- In case it goes out accidentally (eg: a gust of air), your hob is equipped with an auto-
matic re-lighting system. This is limited to 2 re-lightings separated by 10 seconds.
- The minimum ambient temperature for use is 10°C to ensure optimum functioning of the
tap.
- The burner’s flames are smaller near the support to protect the support’s enamel.
The cooking zone can stay hot for
several minutes.
An
“ H
“ H
” is displayed during this period.
Avoid touching the hot areas during this
time.
•
Residual heat indicator
Fig. 5
Fig. 1
Fig. 3
Fig. 2
Fig. 4
Fig. 6
