62
You have doubts about whether your hob is working correctly .... ......
this does not
necessarily mean there is a breakdown.
Nevertheless, check the following points
Minor troubleshooting
- When an error code is displayed, this automatically prevents all use of the timer
.
WHAT IS
HAPPENING?
WHAT TO DO
ERROR
CODES
➡
This is the procedure for connecting
your hob to the electric power.
➡
If you press on the overall stop but-
ton
; this is normal.
✓
Wait for a few seconds for the display
to go out.
✓
Your hob is ready to use.
➤
2 beeps then
F1 - F2 -
F3 or F...
is displayed on
the timer
, then
numbers are displayed
that vanish.
➡
Electricity power cut.
✓
Check that you have electric power.
✓
If you have power and the fault persists, call your After-Sales
Service.
➤
You are not able to ap-
ply any of the controls
and the displays indicate
nothing.
➡
Your burner does not light.
✓
Check that the gas is turned on and that the burners are cor-
rectly assembled.
✓
Check that the injectors correspond to the gas being used (see
table of technical characteristics).
✓
Check that the corresponding burner is sparking properly.
✓
After carrying out all these checks, turn it on again by pressing
.
➤
displays
E4
and one of the indicator
lights for the faulty bur-
ner comes on for a few
seconds then goes off.
➡
The rings are not working. The gas
changing switch is in the wrong posi-
tion.
✓
Check the position of the gas changing switch and press on the
overall gas stop button to erase the fault. Light again.
✓
If the fault continues contact the After Sales Service.
➤
displays
D2
.
➡
The affected burner cannot be
used.
➡
however, you can use the other
burner.
✓
Press the overall gas stop button to erase the fault.
✓
If the fault continues contact the After Sales Service.
➡
You have a flame or a hot item no
the safety unit (thermocouple).
✓
Press the overall gas stop button to erase the fault.
✓
If the fault continues contact the After Sales Service.
➡
The hob has 2 faults.
✓
Press the overall gas stop button to erase the fault.
✓
If the fault continues contact the After Sales Service.
➤
displays
EE
.
➤
displays
E7
:
one of the indicators
lights up to say the bur-
ner is faulty.
➤
displays
E2
and
one of the ring's indicator
lights is flashing.
