Dedicated Micros HyperSense, Руководство по установке

Страница: 9 / 28

Dedicated Micros ©2008
ANPR
Mounting
The DM ANPR camera can be mounted in either a horizontal or vertical orientation by loosening two
screws to adapt the arm. The arm also allows the camera to be adjusted to any angle of inclination
and rotation. The cast base must be secured to a firm and stable surface.
• Remove 4 off M6x16 Socket Head screws (A) from rear bracket and use the cast base as a drilling
template to ensure correct positioning of the mounting holes (B).
• Refit 4 off M6x16 Socket Head screws (A) to rear bracket from cast base before mounting on wall.
Use appropriate wall fixings to support the housing and camera.
B
B
B
B
• To convert the housing from wall mounted to ceiling mounted orientation.
• Remove 2 off fixings (C), rotate bracket arm (D) through 180° and refit fixings (C)
• Loosen locking nut (E) and position the housing to the desired orientation
refer to Camera
Positioning, and re-lock.
A
C
D
E
F
• For additional security 2 off M6 grub screws (F) are provided.
• Access these grub screws by gently prising out the two plastic stop plugs.
• Use a 3mm A/F ball allen key to tighten either one or both of the grub screws against the housing
in the desired orientation. Remember to loosen these grub screws before attempting
to re-orientate the housing at any time in the future.