Dedicated Micros HyperSense, Руководство по установке

Страница: 17 / 28

Dedicated Micros ©2008
1
ANPR
ANPR menu
This menu is only relevant if the camera itself will process the ANPR information.
Traffic Type The camera can be configured for different situations, Barrier
Controlled or Normal. In barrier controlled mode, vehicles
are expected to come to a halt. Normal mode is used for free
flowing traffic.
Detected Timeout (ms) Used in ‘Barrier Controlled’ mode only (not applicable for
‘Normal’ mode). This is the delay between initial plate detection
to reporting it e.g. if it was necessary to force a driver to wait
before opening a barrier
(typically 1000ms).
Repeat Timeout This setting stops the software reporting the same plate twice.
A repeat plate reading is not reported during this timeout period.
Max Plate size (pixels) Once the FOV and Focus have been set, the Maximum
plate size that can be detected can be accurately estimated.
This sets the limits at which the software will try and recognise
a plate
(typically 10000).
Min Plate size (pixels) Once the FOV and Focus have been set, the Minimum plate
size that can be detected can be accurately estimated. This
sets the limits at which the software will try and recognise a
plate (typically 500).
Pre-caching Normal is more accurate and finds the exact location of
plates in the image. This setting is recommended for ‘Normal’
Traffic Type.
Fast finds the plate quickly, but will give less accurate results or
may even fail to report a plate. This setting should only be used
for ‘Fast (Motorway)’ Traffic Type.
Region The appropriate region should be selected along with a list of
selected countries. Countries are added to the selected list from
the available list by using the ‘>’ button.
Similarly countries are removed from the selected list using
the ‘<’ button. The list of countries can be reordered using the
‘+’ and ‘-’ buttons. The order determines the priority in which
syntax checking is applied when performing a plate reading.