Dedicated Micros HyperSense, Руководство по установке

Страница: 15 / 28

Dedicated Micros ©2008
1
ANPR
System
This page shows the general information about the unit, including the version of software installed
and details of the video standard adopted.
Product Descriptor This is a read only setting showing the product configuration.
Software Version This is a read only setting showing the current version of software
loaded on the unit.
Note: This information may be required during a technical support call.
Camera 1 Name This field allows a suitable name to be allocated to the fitted
ANPR camera.
Camera 2 Name This field allows a suitable name to be allocated to the overview
camera (if fitted).
Note: Camera 1 and Camera 2 Names will be recognised by any NetVu Connected device that
views it ie NetVu ObserVer, NetVu Console, SD, DV-IP Range and HighVu and displayed in
the site tree and in the image header on the viewer.
Timezone The appropriate timezone can be selected from the drop down The appropriate timezone can be selected from the drop down
menu (corresponding to the location of the camera).
Sync Time from PC The unit time can be synchronised with the time on the PC being
used for the configuration process, by clicking on this button.
Serial Port Config The Serial Port on the camera can be used for debug ie finding
the IP address, refer to Locating the unit IP address .
Ramdisk (A): The camera is capable of storing data internally. This is the
amount of memory allocated to ftp operation.