Dedicated Micros HyperSense, Руководство по установке

Страница: 16 / 28

Dedicated Micros ©2008
1
ANPR
Network menu
This page allows access to the network settings of the unit.
System Name Enter a valid relevant name to identify the unit on the network.
This name will be recognised by any NetVu Connected device
that views it ie NetVu ObserVer, NetVu Console, SD, DV-IP Range
and HighVu and displayed in the image header on the viewer.
I P Address,Subnet,Gateway This is the static IP address and subnet mask, and if applicable,
default gateway
Note: If these fields are changed to zero, the camera will revert to DHCP when it is reset.
DHCP Address If the unit was installed on a DHCP network this will display the IP
address of the DHCP server allocated on power up of the unit
DHCP Subnet If the unit was installed on a DHCP network, this will be the subnet
of the network the unit is connected and will automatically be
allocated by the DHCP server on power up
DHCP Gateway This is the IP address of the default gateway (router) that the unit
will automatically be assigned by the DHCP server
Note: DHCP should be disabled. The IP address of the unit may change whenever it is powered
off or reset, and the new address will have to be acquired directly from the unit. DHCP is
disabled once an IP address is assigned in the IP address box.
Note: Always consult the network administrator for IP address, Subnet Mask and Gateway
information.