Dedicated Micros CamVu 2000, Инструкция по установке и эксплуатации

Страница: 52 / 112

Dedicated Micros ©2010
52
CamV
u 2000
Draft
alarm
The Alarm Settings menus allow configuration of the unit’s alarm functionality. Individual alarm inputs and
alarm zones can be configured. Global relays can be activated and the Activity grid set up. Refer to the
individual menus for further details.
The Inputs page allows configuration of alarm channels. Two alarm channels are available.
The Zone Input page enables the configuration of alarm zones. Up to 32 separate alarm zones can
be created.
The Zone Actions page enables actions such as Go to Preset to be allocated to alarm zones. Zones can
also be associated with a specific camera. On receipt of an alarm, images from the associated (primary)
camera will automatically be displayed in the Viewer menu.
The Masked Cam(era) Det(ection) page allows camera masking to be configured. The Camera can detect
when the lens has been obscured, i.e. by being covered or painted over. This page will enabled detection
and set the threshold for activation.
The VMD/Act Response page enables configuration of responses following an Activity
Detection trigger.
The Activity Setup page allowed activation and configuration of the Activity feature on all video inputs. The
Activity feature enables the camera to automatically detect any movement/changes within the video scene.
This can trigger a number of operations such as FTP alarm notification or an increase in the recording rate.
The VMD Configuration page enables the unit’s VMD (Video Motion Detection) to be set-up. VMD allows a
camera to automatically detect if there is any movement/changes within specific areas of the video scene.
The Global Relays page allows the four onboard relay connections and global relay settings to
be configured.