Dedicated Micros CamVu 2000, Инструкция по установке и эксплуатации

Страница: 61 / 112

Dedicated Micros ©2010
61
CamV
u 2000
Draft
VMD/act response Setup
The unit can be set up to detect either VMD or Activity, depending on the level of detection required.
Video Motion Detection enables a greater degree of control over detection settings and configuration
than the Activity Setup function.
VMD Pulse Ext (s) A pulse extension is used to prevent double triggers on a single
alarm. The pulse extension time starts on an alarm trigger. If that
contact is triggered again after the first alarm has finished but within
the pulse extension, the second trigger will not generate a new alarm,
but will extend the current alarm duration. Enter the time in seconds
for this extension.
Note: This setting applies to both VMD and Activity.
Channel Shows the channel being configured.
Detection Type To configure the selected camera channel for Activity, select ‘Activity’.
To assign no detection settings, select ‘None’.
Activity To Trigger Following Activity activation, select ‘Simple Response’ to trigger
specific chosen responses. Refer to ‘Activity Response Setup’ for
more information. Select ‘Zone’ to apply the Zone Input rules as
configured in the Zone Input menu. Refer to ‘Zone Input’ for
more information.
Create Database Entry When selected, an alarm entry will be added to the
Event database.