Decision Data IS-488, Руководство пользователя, Страница: 37 / 162

Offline Setup
The test is being continuously performed, that is to say, if the status of any device on the line,
or the status of the line itself changes, after a few seconds the status message on the screen
will change accordingly.
The addresses of the devices are the addresses set in the SETUP as the address of the
workstation/printer, with no relation to the logic address defined on the computer, such as P1,
W12, etc.
3.4.7 Keyboard Test
Enables the Keyboard Test screen.
1. Select Keyboard Test from the Test menu.
2. Press Enter to display the keyboard test screen.
3. A keyboard map is displayed. When a key is depressed, the parallel key on the screen is
highlighted.
4. Press F3 to exit to the Test menu.
3.4.8 Printer Test
Enables the test screen for a parallel printer.
1. Select Printer Test from the Test menu.
2. Press Enter to display the printer test screen.
3. Press Enter to initiate the test.
4. Press F3 to exit to the Test menu.
3-15