Decision Data IS-488, Руководство пользователя, Страница: 36 / 162

Offline Setup
To display the character set
1. Select Display Char Set from the Test menu.
2. Press Enter to display the first character set, and the Spacebar to view other sets.
3. Press F3 to exit to the Test menu.
3.4.5 Display Version
This screen displays the workstation version.
1. Select Display Version from the Test menu.
2. Press Enter to display the workstation version.
3. Press F3 to exit to the Test menu.
3.4.6 Twinax Line Test
This screen enables the initiation of a Line test. The online test is performed continually and
updates its status continually until it is terminated (by pressing F3).
1. Select Twinax Line Test from the Test menu.
2. Press Enter to initiate the test.
Device addresses from 0 to 6 are listed and their status determined. A blinking Line
Testing ... message appears at the bottom of the screen.
* will appear bellow each listed address of a device that is communicating
with the host controller.
= will appear bellow each listed address of a device that is not present on
the system or which did not communicate with the host controller.
-
will appear bellow each listed address of a device that the host controller
did not attempt to communicate with (Polling).
3. Press F3 to exit to the Test menu.
3-14