Decision Data 3000 Series, Руководство пользователя

Страница: 38 / 116

Host Connections
4. Page forward to display each PU and its assigned line as illustrated by the following
screen:
5. Assign each PU an address according to the following section.
Assigning PU Addresses
Define each PU with the address assigned to it at the AS/400 system location. The address
should match the
Station Address as defined in the AS/400 APPC Controller attributes.
If the line type is X.25, the Station Address is derived from the last five digits of the
Exchange Identifier in the APPC Controller description. Valid entries are hexadecimal
values 01 to FE.
PUs defined for the same line must have consecutively ascending addresses, starting with
the primary PU address. The multiple PU addresses are configured automatically by typing
10