Decision Data 3000 Series, Руководство пользователя

Страница: 62 / 116

Session Access
4 To enter a logical channel:
If your network subscription provides more than one logical channel, type [L] followed by
a three character hexadecimal code to identify the logical channel to be used.
Valid logical channel values = Hexadecimal values [001 to FFF].
For SVC, WITH Manual Options, the following additional options
are available :
5. If you are using the closed user Group ,
enter [U] followed by a two digit closed user group ID .
6. If you are using reverse charging,
enter: [R]
7. To select other optional facilities , enter [F] followed by two characters that identify
the facility, and two or more characters for a parameter code. Values = [0 to 9, A to F]
Examples:
a). To select a specific throughput class facility, enter: F02, followed by two
hexadecimal digits [0 to 9, A to F]
b). To select an RPOA , enter [F44] followed by a four digit code representing the
RPOA you want to use.
NOTE: After the last parameter is entered on the system request line, press ENTER.
* Insert a comma between successive parameters.
8. If Control Negotiation is enabled, the following options are available: .
a) Change the packet size - type [P] followed by the new packet size.
Values = [064, 128, 256 or 512].
b) To change the packet window size - type [W] followed by a two digit code.
Code values = [02 to 07] for modulo 8 to 15] for modulo 128
For single SVC Answer with NO manual options:
No operator action is required to initiate communication following power-on or to re-establish
communication following successful network link error recovery.
For single SVC Answer WITH manual options:
4