DEC 3000 800, Руководство пользователя

Страница: 101 / 318

Connecting to a 10BASE2 Network
Step 4:
ThinWire
Cable and
T-Connector
Connect the ThinWire network cable to the T-Connector and
then the T-connector to the DECXM transceiver as shown in
Figure 5–4.
Figure 5–4 Connecting the ThinWire Cable and T-Connector to
the DECXM Transceiver
MLO-011209
Step 5:
Terminate
Connection If your workstation is the last one on a ThinWire network, you
need to terminate the network connection. Do this by connecting
a terminator, rather than a ThinWire network cable, to one
side of the T-connector on the DECXM transceiver as shown in
Figure 5–5.
Figure 5–5 Terminating the Ethernet Connection
MLO-011210
Connecting the System to a Network 5–9