SUPER MARATHON SERIES GAS FRYERS
CHAPTER 3: INSTALLATION INSTRUCTIONS
3-15
3.7 Gas Conversion Procedures (cont.)
Vessel Assembly
Gas Valve
Manifold Support Bracket
Gas Burner
See Detail A
Pressure
Test
Spigot
Orifice
Temperature
Control
Gas
Manifold
Assembly
1/2—3/4 Reducer
Bushing
Burner
Gas Manifold
Burner/Orifice Location
Detail A
Orifice
1.30-inch [33-mm]
1.63-inch [41-mm]
3.8 Gas Conversion Components
Use the following components to convert from natural gas to propane and vice-versa. See Section
3.6 for orifice quantities required for conversion.
Natural Gas to Propane Components
Propane To Natural Gas Components
REF DESCRIPTION REF DESCRIPTION
810-2400 Pilot
orifice
(16LP) 810-0811 Pilot
orifice
(26N)
Burner orifice*
(See Tables on Page 3-10 – 3-11)
Burner orifice*
(See Table on Page 3-10 – 3-11)
New Rating
Plate
Contact factory at time of
conversion.
New Rating
Plate
Contact factory at time of
conversion.
* Burner orifices listed on page 3-10 – 3-11 are for fryers operating at altitudes of
2000 feet (610 meters) or less. For altitudes greater than 2000 feet (610 meters),
contact the factory for the correct orifice size.
Typical gas valve, burner and orifice locations (SM50 shown above).
Содержание SM20 GM
Страница 43: ...THIS PAGE INTENTIONALLY LEFT BLANK...