Page
9
of
18
Flue Connections and Outlets
Flue Connections and Outlets
Dean Stoves can be flued from the top and the back, or with a vertical back box. Horizontal flue from
back of stove should not exceed 150mm.
.
Diagrams showing the flue outlet from the top (
A
), back (
B
) and back box (
C
)
All flue connections must be sealed with fire cement. Doors in the register plate must be present or a
soot box fitted in the back or side of the fireplace to enable access to clean the chimney when the stove
is installed without a liner.
If the chimney has been lined and cannot be swept through the stove an access door on the first length
of flue must be installed for cleaning access.
Leg Adjusters
To level the stove there are leg adjusters on each leg of the stove, a 13mm spanner will be required to
make any adjustment. The adjusters on the Huccaby and Foxworthy are located behind the side plate
to the inside of both legs. To access them you will need a 3mm allen key to remove the side plates.
Содержание Dartmoor 5E
Страница 17: ...Page 17 of 18...
