Deagostini Model Space HUMMER H1, Инструкция по сборке

Страница: 19 / 28

HUMMER H1: STEP BY STEP
™
185
11
55
33
77
22
66
44
88
Inspect the brake pads and
calipers. Lay the parts out,
as shown: note the shape
and orientation of each. The
holes on the left and right
side are different shapes
(see red circles). Ignore
the pattern printed on the
brake pads.
Place the second brake pad
over the brake disc, so that
its holes line up with those
of the first.
Next, place the
corresponding brake pad
over the caliper, making sure
the holes line up.
Place the first 3 × 12mm
binding-head screw
provided in Stage 39 through
the holes on the right of
the brake pads and calipers,
and into the hole in the gear
mount beneath.
Holding the center gear
mount as shown, place the
first brake caliper so that
its two holes line up with
those on the casing of the
mount (arrows). Make sure
you have the orientation
of the caliper positioned
correctly, as shown in the
photo.
Fit the brake disc over the
protruding cup joint.
Add the second brake
caliper.
Holding the parts in place,
gently tighten the screw, but
stop before the head touches
the outermost caliper.