HUMMER H1: STEP BY STEP
™
181
17
17
21
21
23
23
20
20
19
19
24
24
18
18
22
22
Press the brake cam
into place.
Hold the assembly level,
then lower the center gear
cover onto it, so that the
arrowed holes line up.
Press the brake collar
down so that it rests on
the upper edge of the
gear mount.
Place the brake collar
onto the tip of the brake
cam, with the flange
side facing down.
Next, repeat for the next
three circled holes. Do not
fully tighten the screws at
this stage.
Holding the parts
together, insert the first
3 × 18mm self-tapping
screw into the circled hole
and tighten lightly.
The short side of the cam
should be visible in the
rectangular hole from the
outside of the gear mount.
From above, check that
the circled screw holes
are correctly aligned.
Содержание Model Space HUMMER H1
Страница 17: ...HUMMER H1 STEP BY STEP 183 ...
Страница 27: ...HUMMER H1 STEP BY STEP 193 ...
Страница 28: ...HUMMER H1 STEP BY STEP 194 RADIO CONTROL CAR ...