manualshive.com logo in svg

DCS RF48SS, Руководство по обслуживанию, Страница: 31 / 74

Поделиться
Скачать
DCS RF48SS Скачать руководство пользователя страница 31

32

QUICK ICE

Press them simultaneously for 6 seconds and then the R-Room 

①

5) Load Status Display Function

1) When pressing the  POWER  FRE. and the POWER REF. buttons simultaneously for about 6 seconds during normal 

operation,the F/R-Room temperature LCD blink for 2 seconds at an interval of 0.5 sec on/off..

At this point,when taking your finger off the POWER FRE. and the POWER REF. buttons and pressing 

the REF. TEMP  temp button,it goes into the Load Status Display.

2) The Load Status Display shows the load in operation in real time.(what is operating at the time)

However,it is not related to the actual operation status of load.It only shows the load operation command from MICOM.

3) The LCDs for only the loads in operation blink repeatedly.(segments of the display will blink)

4) The Load Status Display continues for 30 seconds and then is restored to the normal display.

6) Restoration of Operation Conditions during Power Failure

1) Power failure or initialization of the Panel Display can cause the customer to call for service.

To avoid this,if the power on,it determines the temperature of the F-Room to decide whether to go into  initialization or to restore the

previous operation conditions.

2) With the initial power is on,it determines the temperature of the F-Room.If it is below 41

℉

,it considers it as  power failure and restores

previous  functions (POWER. FRE , POWER. REF F-and R-Room Settings,ICE Types,etc.)related  to the PANEL DISPLAY.

3) With the  power is on,it determines the temperature of the F-Room.If it is over 41

℉

, it considers it as extended power failure and starts

to initialize the PANEL DISPLAY (Automatic setting as the F-Room at  0

℉

and the R-Room at  38

℉

and ICE CRUSHED).

②

then

press

BRANDSOURCE-SM(EN) 

 

2007.1.23 

10:31 

AM 

 

페이지32

Содержание RF48SS











































































Отзывы:

Нет отзывов