DCS RF48SS Скачать руководство пользователя страница 23

Страница: 23 / 74

●

Do not touch on containers or food in the freezer compartment with wet hands.Possibility of frostbite.

●

Do not put food or containers in a place directly exposed to the cold air discharging port. It could be colder than
the set temperature resulting in food damage.

●

Do not keep medical products or lab materials in the refrigerator.This product is only for food storage.

●

Do not put any glass bottles, in the freezer compartment.When the content freeze, it can burst, and causing
severe injury.

Dairy Bin

You can store dairy products such as butter
and cheese.

Fridge Door Bin

You can store small packaged refrigerated
food and beverages such as milk, fruit juice
and beer.

Fridge Compartment Shelf

Please put dishes or refrigerated foods with
enough space between items.

Veggie/Fruit Drawer

You can store vegetables and fruits in fresh
conditions.

Fresh Island

You can store meat , raw fish and food
which needs to be stored at lower
temperature than that in the fridge
compartment to be used within a week.

BRANDSOURCE-SM(EN)

2007.1.23

10:31

페이지24

Содержание RF48SS











































































Результаты поиска

Содержание RF48SS

Отзывы:

DCS RF48SS, Руководство по обслуживанию, Страница: 23 / 74

Результаты поиска

Содержание RF48SS

Отзывы: