8
Gas Requirements
NATURAL GAS HOOK UP
Connection: 1/2" NPT male with 3/8" flare adapter.
Operating pressure: 4.0" W.C.
Supply pressure: 5" to 14" water column. If in excess of 14" W.C. a step down regulator is
required.
Check with your local gas utility company or with local codes for instructions on installing gas supply
lines. Be sure to check on type and size of run, and how deep to bury the line. If the gas line is too
small, the grill will not function properly. Any joint sealant used must be an approved type and be resis-
tive to the actions of LP gases.
TO HOOK-UP THE FITTINGS SUPPLIED WITH THE GRILL
Assemble as shown (fig.01). Use threading compound on male threads only. Do not use threading com-
pound on the male end of the 1/2 NPT to 3/8 flare adapter. Use a second pipe wrench to hold the grill
inlet pipe to avoid shifting any internal gas lines of the grill. Ensure that the regulator arrow points in
the direction of gas flow towards the unit, away from the supply. Do not forget to place the installer
supplied gas valve in an accessible location.
FIG. 01
