Lighting Instructions
19
TO LIGHT GRILL BURNER
Ensure power is supplied to the unit. If not, burner must be match lit (see below).
Open the lid, push and hold the ignition button next to the desired burner knob to be lit for 5 sec-
onds. Turn control knob to LITE. If the burner does not light in 4 seconds, turn knobs to “OFF” and
wait 5 minutes before trying again for any accumulated gas to dissipate.
MATCH LIGHTING
If the burner will not light after several attempts then the burner can be match lit. If you’ve just
attempted to light the burner with the igniter, allow 5 minutes for any accumulated gas to dissipate.
Keep your face as far away from the grill as possible and hold a lit match over the hole located on the
top left for burner on the left, or the right hole for the right burner. Push and turn the control knob
which is centered on the burner where the lit match is located, to “LITE”. If the burner does not light
in 4 seconds turn the knob off, wait 5 minutes and try again.
Once the left or right burner is lit, the adjacent burner(s) can be lit by the cross-lighting method. For
center burners to cross light, light the adjacent far left or right burner using the standard or match
light procedure. Push and turn the control knob for the desired center burner to “LITE” the gas will
be ignited by the adjacent burners flame. If the burner does not light in 4 seconds, turn knob off, wait
5 minutes and try again.
FIG.13
FIG.14