Dawson Tools DAN120, Руководство пользователя

Страница: 19 / 22

18
NOTE:
Circuit impedance must be at least 600 ohms.
0 decibels = 1 milliwatt.
1.5V and 9V Battery Test

To check if the battery is in good or bad condition,
switch the rotary switch to “
1.5V AA ” or “ 9V ” on
the right side according to the battery type.

Connect the red lead (+) to the (+) side of battery
and black lead (-) to the (-) side.

Read the result, REPLACE or GOOD , from the
bottom of the scale.
Specifications
General Specification

Ranges: 19 measuring modes

DC Voltage: 2.5,10,50,250,1000 Volts

AC Voltage: 10,50,250,1000 Volts

DC Current: 5,50,500mA and 10A

Resistance : Rx1, Rx10, Rx1K (resistance indicated
multiplied by 1, 10 and 1000) ohms

AC voltage range:-8dB to +62dB

Accuracy:
DC voltage, mA = ±4% full scale of range