12
DC Current Measurement (mA)
Plug the test leads in to input jacks.
Connect the test lead to the target, red to positive
and black to negative terminals.
Read of the scale as described in
Reading the Scale.
NOTE:
For 5mA Range, use the 0-10 scale and then
multiply by 0.5mA
For 500mA Range, use the 0-250 scale and
multiply by 2mA
Common DC mA Current Measurements
WARNING
DO NOT APPLY VOLTAGE TEST WHEN ROTARY SWITCH
IS IN CURRENT MODE
WARNING
DO NOT APPLY VOLTAGE TEST TO THE TEST LEADS
WHEN ROTARY SWITCH IS IN CURRENT MODE
