6
Important Safety Information
Never use the Meter to measure voltages that
might exceed 1000V DC/AC above earth
ground.
Always be careful when working with voltages
above 60V DC or 30V AC RMS. Keep fingers
behind the probe barriers while measuring.
Never connect the Meter leads across a
voltage source while the rotary switch is in
the resistance, diode or continuity mode.
Doing so can damage the Meter.
Inspect test leads and probes for cracks,
breaks or crazes on the insulation before
using the Meter.
Repair or maintenance should be
implemented by trained personnel.
Certification
CAT II
: This meter has meet IEC1010-1
standard with an overvoltage category (10
00V CAT II) and pollution degree 2.
The Meter is compiled to EMC
requirements.
