17
indictor will move to ~0 ohm. On other switches such as
three-way light switches or double pole double throw
(ON-OFF-ON) switches, each ON position will need to be
tested. Alternate the test leads between the switch
terminals to determine which two terminals control the
ON position.
Transistor Gain Measurement (dB)
To measure the gain of a transistor:
Plug the test leads into the input jacks.
Set the rotary switch to any one of the AC voltage
ranges and read the decibel measurement on the
bottom (red) scale.
Compute the actual decibel conversion based on
the chart located at the bottom right of the
faceplate.
