DAVIS TECHNOLOGIES Profiler, Руководство пользователя

Страница: 97 / 165

Profiler User Guide
4-51
hold down the
Ctrl
>
left click
the mouse over the grip you want to
select. The grip will
now be red in color indicating it’s selected.
Next, hold down the
Shift
>
left click
the mouse over one of the grips
at .6 seconds. If all went well, all the grips between those two points
should be red indicating the range of grips you selected.
The section of grips you selected should look like the
image on the left. If not, try again. Learning this
selection method is critical in manipulating Profile
curves.
At this point, you have a couple of choices of how to
smooth this dip, one is manual, the other uses one of
the powerful features of the Profiler which is
“
Smoothing
”.
You can use the mouse to smooth by holding down
the left mouse button on the bottom of the dip and moving the
selected grips to wherever you choose. You will get a feel of how to
move it once you try this method.
Allowing the software automatically do the smoothing works very
nicely. When the grips are selected simply click on the smoothing
icon, the more times you click, the smoother the line will be.
The Smoothing function is only available when a group
of grips is selected, otherwise it’s greyed out.
This result was achieved by clicking the Smoothing
button about 20 times. If you want the curve
smoother, click it more times or so. That area
may require adjustment after a pass is made
depending upon how much “correction” is
required to clean up that area of the run. You can
see where the original curve was as well as the