Davicom Cortex 320, Справочное руководство

Страница: 83 / 92

83
7 – VALUE WHEN NORMAL
Value to write into the SNMP device and which will be considered as the normal value. This normal value will be
written into the device everytime the SNMP SET toggles from an active state to a normal state. More information is
provided further below.
8 – VALUE WHEN ACTIVE
Value to write into the SNMP device and which will be considered as the active value. This value will be written into
the device everytime the SNMP SET toggles from a normal state to an active state.
9 –
ENABLE
Enable / disable the SNMP SET output. Useful when wanting to temporarily stop the output from controlling a device
without deleting and losing its configuration settings.
10 – PORT
SNMP port number of the selected SNMP SET output. Default is 161.
11 – VALUE TYPE
Type of value to be written in the SNMP device. Different types are available, like Integer, Display String, Gauge,
Truth Value, etc. This value type must match the one of the device’s controlled I/O..
12 – COMMUNITY
SNMP community name. Must be an exactly match of the community name set in the remote SNMP device.
13 – SYSTEM LOG
Log the input’s activity in the System Log. Useful when outputs do not need to be logged, but are required for day-
to-day operation.
14 – SIGNALING ON FAILURE
Generate alarm upon SNMP SET failure. See explanations above. NOTE : The reset of a failure alarm will happen
after the next successful SET command.
15 –
TEST NORMAL
Manually generate a SET command using the normal value.
16 – TEST ACTIVE
Manually generate a SET command using the active value.
17 – REFRESH / READ
Refresh / read the screen content.
18 – SAVE / WRITE
Save the screen content.
19 –
EXIT
Exit menu.
QUICK-ACCESS MENU
A quick-access menu is available by right-clicking on any GET input line in the main menu screen.
1 – CONFIG
Access the configuration menu of the selected SET outputs. Bulk configuration is possible if multiple inputs are
selected.
2 – ENABLE
Enable the selected SET output.