Davicom Cortex 320 Скачать руководство пользователя страница 10

Страница: 10 / 92

Front & rear panel descriptions

1.3.1.

Front panel (CORTEX 360)

The Cortex front panel provides easily accessible site and equipment-status information without requiring the use of a

computer.

CORTEX-360 front panel

OLED Display

- Under normal operation, the display is blank to conserve power. To turn it on, push any of the four menu

buttons.

Menu buttons

- Four push buttons allow navigation through the different OLED menus.

POWER LED

- Indicates status of the unit’s power. It is on when the unit is under rated power.

ALARM LED

- Shows the Alarm status. If there is one or many alarms, the LED will be on.

COMMUNICATIONS

- Shows the unit’s call-out status. It will turn on every time the unit makes an outside call (telephone,

email, SNMP Trap, etc.)

USER ONLINE

- Indicates if one or more users are connected to the unit.

ACTIVITY

- Indicates the health status of the CPU. This “heartbeat” flashes at a rate of one (1) pulse per second when the

unit is operating correctly.

PAUSE

and

LOCAL

buttons- The PAUSE button stops transmission of Alarms to the outside, while the LOCAL button

blocks outside actions and control when staff is on-site for maintenance or repair work.

Headphone

jack- Provides audio for monitoring purposes. It is active when audio is applied on the unit’s rear connector

audio input pins. A powered speaker can also be connected to this port.

USB port

- Provides a means of connecting to the unit using a computer with the DavLink 6 software.

Содержание Cortex 320





























































































Результаты поиска

Содержание Cortex 320

Отзывы:

Похожие инструкции для Cortex 320

Бренды по названию

Популярные бренды

Davicom Cortex 320, Справочное руководство

Результаты поиска

Содержание Cortex 320

Отзывы:

Похожие инструкции для Cortex 320

Бренды по названию

Популярные бренды