Davey Maverick, Инструкция по эксплуатации

Страница: 3 / 16

3
1. PRIOR TO USING THE SYSTEM, YOU MUST ENSURE THAT...
1.1 This manual contains important information that will help you in operating and maintaining the Davey
Maverick. Please retain it for future reference. Before installing the Davey Maverick, read and follow all
warning notices and instructions which are included. Failure to follow safety warnings and instructions
can result in severe injury, death, or property damage. Consult your place of purchase with any questions
regarding this equipment. Alternatively refer to your local Davey representative via the contact details at
the end of this manual.
ATTENTION: Do not play with cleaner or hose or apply to body. It is possible to trap
and tear hair, or body parts. Hose can trip or entangle swimmers which could result in
drowning. If your pool has a dedicated suction port (“vac port”) for vacuuming or for an
automatic pool cleaner, it must be covered when not in use.
To reduce the risk of injury, do not let children use or play with pool cleaner. Do not
allow swimmers in the pool while the Davey Maverick is operating. Hose can trip or
entangle swimmers which could result in drowning. Moving parts may injure hands or
fingers. Stop pump before attempting to clean out the Davey Maverick head.
IMPORTANT: Stop pump before attempting to clean unit. Do not allow swimmers in pool
while pool cleaner is operating.
2. YOUR NEW SYSTEM
1. Davey Maverick body
2. Hose float
3. Threaded adaptor
4. Reducer cone
5. Regulator valve
6. Elbow
7. Flow gauge
8. 11 section hose set using:
10 x standard hoses; and
1 x leader hose.
3. INSTALLATION
3.1 Pre-Installation Check List
3.1.1. Before installing the Davey Maverick, review and understand all warnings and safety information in
this guide. Failure to follow these instructions, or improper installation of the Davey Maverick can
result in damage to the pool finish, or the vinyl liner, Davey Water Products disclaims any liability
for repairs or replacement to any of these structures or components of the customer’s pool.
3.1.2. Before installing the Davey Maverick in a vinyl liner pool. Check liner closely for signs of
deterioration or damage from age, chemicals, pool wall damage, etc. If any damage is found, have
a qualified pool professional make all the necessary repairs. Also, if there are stones, roots, etc.,
under the liner, remove them before installing the Davey Maverick. Before installing the Davey
Maverick in a gunite pool (framework that is sprayed over with a concrete and sand mixture), or a
pool that is partially, or completely tiled. Repair loose tiles and tighten any loose light rings.
1
REBEL™ Suction Side Pool Cleaner Installation and User’s Guide
POOL PREPARATION
1. Rebel cleaner body
2. Hose float
3. Threaded Adaptor
4. Reducer Cone
5. Regulator valve
6. Elbow
7. Flow gauge
8. Hose Set – 11 Sections
-10 Standard Hoses
-1 Leader Hose
Cleaner Components
Remove the cleaner and all parts from the box. Check to be sure all components are included.
Pool Preparation
Before installing the Rebel™ Suction Side Pool Cleaner, your pool should be clean and algae-free so as to not
inhibit the cleaner’s traction. If necessary, make the following preparations before proceeding:
1. Chemically balance the pool water.
2. Brush pool and let the debris settle.
3. Hand vacuum thoroughly.
4. Clean filter and pump strainer basket.
1.
2.
Standard Hose
Leader Hose
8.
Figure 1
7
5 4
6
3
Figure 2.1