Water-tight IP68 connectors
REV. 20/02/2019
A
Pool step
Treaded ring
REQUIRED FOR SKU # 9015 RGB BT
2) Insert the lighting fixture from the outside of the step.
3) Fasten the treaded ring and align the fixture properly in the step before tightening.
Tighten the ring moderately.
IMPORTANT: Use supplied tie wraps to attach electric cord to a post as
shown. Do not submerge the connector the product could
be damaged.
INNOVALITE 120V COLOR LED LIGHT # 9015 RGB BT
LIGHT INSTALLATION ON THE STEP
90 days on manufacturing defects.
Replacement only.
x 2
THIS GUIDE CONTAINS IMPORTANT SAFETY INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
WARNING
Before installations, carefully
read the warnings and
installation instructions.
Risk of electrical shock.
Failure to follow the safety
instructions can result in death
or severe injury.
TABLE OF CONTENTS
A) Light installation on the step.
B) Securing power cord.
C) Before plugging in the
product.
D) Winter storage.
E) Safety instructions.
COMPATIBLE WITH ANY INNOVAPLAS, LUMI-O OR
ACCES STEP CONTAINING THE CREST ROUNDEL
1) Remove the Innovaplas round cap from the step by compressing 2 tabs at the back.
For the Biltmor or Aquarius step cut the 4 tabs with a utility knife to remove the blank
cap.
Utility knife
LIMITED WARRANTY
For Biltmor
or Aquarius
step.
