Davey Maverick, Инструкция по эксплуатации

Страница: 4 / 16

4
3.1.3. Before installing the Davey Maverick, clean your filter system. Make sure you have cleaned the
filter, including backwashing, rinsing, and emptying all baskets. A clean system is necessary for
proper cleaner operation and coverage.
3.1.4. Before installing the Davey Maverick, understand cleaner coverage. The Davey Maverick is
designed to rid your pool of debris in approximately 4-6 hours. Less time could be needed,
depending on the pool size. The Davey Maverick was not designed to automatically clean steps or
swim outs or to work under a solar cover. It was also not designed to do initial clean up for a new
pool or when opening your pool for the season.
3.2 Pool preparation
Before installing the Davey Maverick, your pool should be clean and algae-free to not inhibit the cleaner’s
traction. If necessary, make the following preparations before proceeding:
• Chemically balance the pool water;
• Brush pool and let the debris settle;
• Hand vacuum thoroughly; and
• Clean filter and pump strainer basket.
3.3 Assembling the Davey Maverick
The Davey Maverick body is shipped as one piece, making cleaner assembly a simple and quick process.
3.3.1. Hose assembly
For best results and to maintain proper operation, use only original Davey Maverick™ parts and hoses.
• To connect the hose sections, wet the ends in the pool water, then twist and push the female
ends onto the male ends. See figure 3.1.
Figure 3.1
Male Hose End Female Hose End
• Connect the leader hose to the cleaner swivel. See Figure 3.2.
Figure 3.2
Leader
Hose
Swivel
Assembly