Davey DynaDrive DD160-19, Инструкция по установке и эксплуатации

Страница: 14 / 32

14
6.4 Changing the set pressure
IMPORTANT: When adjusting set pressure, do not exceed the pressure capable of the
DynaDrive in the given installation. When changing the set pressure of DynaDrive, the
pressure of the pressure tank must also be adjusted. Refer to section 4.5 pressure tank,
of the installation chapter.
The set pressure cannot be changed while the pump is running, or in automatic mode.
To change the set pressure:
• Ensure automated control is turned off. To turn the automated control off, push the Automatic on /
manual off button .
• The green
Automatic LED
will turn off, see figure 6.5;
Figure 6.9
P/
N
:1
611
5-
1 B
Pset 400
Pact 400
• Once the motor has slowed to a stop, press and hold the Menu button for ~ 5 seconds. The display
will change to show your current set pressure, see figure 6.10;