ENG & FREESTANDING TELEPROMPTER KIT TP-700
15
8. Fit the Snood / Hood support wire,
item K
.. This
stops the cloth Snood / Hood from dipping in front
of the camera lens. There are two sets of holes in
the glass frame for this Snood / Hood support
wire.
9. Fit the cloth Snood / Hood,
item I
, to the Glass
Frame edges,
item G
. The Velcro strips marry the
Snood/Hood to the Glass Frame.
7. You can now fit the lower part of the ENG Prompter
Frame
item B
to your tripod or light stand using one
of the three 3/8 threaded holes, use the 3/8 to ¼
adapter,
Item P
if required. Typically, the central
3/8 hole provides the correct balance if not using a
talent monitor, the front 3/8 hole should be used
with a talent monitor.
Note:
A light stand should only be used when using the
TP-700 without a talent monitor, always use an
appropriately rated tripod when using a talent monitor.
