ENG & FREESTANDING TELEPROMPTER KIT TP-700
9
Assembly
– TP-700
Assembly
–ENG Configuration
1.
Attach/screw the tripod’s own quick release plate
to the screw holes on the base of the TP-700
ENG Prompter rail,
item A
.
The long slot will be to the rear of the camera
position and the four holes in the rail will be
towards the lens of the camera.
2. Now slide and secure the tripod plate, with
prompter rail,
item A,
onto the head of the tripod
or dolly.
3. Use the hand screws
item C,
to secure the lower
part of the ENG Prompter Frame
item B
in place
using the counter sunk holes in the main part of
the frame
item A
.
Note:
There should be two holes left free in front
of this mounting position for the Glass frame.
4. There are four adhesive Velcro straps packed
inside the Snood/Hood,
item I
. Peel off the white
paper backing before applying these straps to
the Glass Frame,
item G
.
Apply the two long Velcro strips to the Glass
Frame edges on the Left side and Right side.
Then apply the two smaller Velcro strips to the
Bottom Left and Right sides of the Glass Frame
edge.
Be careful not to cover any screws and keep
them straight.
