ENG & FREESTANDING TELEPROMPTER KIT TP-700
39
Slave Mode:
When enabled the device will act as a slave screen to another dvPrompter app, please see the
'Synchronising multiple devices' section for more information.
Default font:
Select the default font used by the editor (this can be overridden on a per script basis using the
editor).
Font Size:
Sets the default font size, this will apply to all text that does not have a font size set within the
editor.
Line Height:
Sets the spacing between lines when scrolling, values below 1 may result in text overlapping.
Font colour:
Sets the default font colour (this can be overridden on a per script basis using the editor).
Background colour:
Sets the background colour.
Orientation:
Select if your device will be ‘Landscape’ or ‘Portrait’.
Mirrored Display:
Set to ‘Off’ if reading the text directly from the device, set to ‘On’ if reading the text via a
mirror.
Loop:
Set to ‘On’ to continually loop the script when finished (only valid when playlists are not in use).
Scrolling speed:
Set the speed the text will start to scroll at, this can be adjusted via the hardware or network
remote control.
Cue marker:
Optionally select a cue marker to define the line of text the talent should read.
Cue Background:
Set the cue marker background colour (only valid when using plain or combined cue
markers).
External Display:
When disabled any second display connected via HDMI or wireless will mirror the main
display, when enabled text will only scroll on the second display, the main display can be used to create and
edit scripts as well as control the text.
Border:
Used to add a border around the scrolling text, this is useful if the text is too close to the edge of your
monitor and or beam-splitter glass.
Timer:
Display a timer showing the time the text as been scrolling on screen, the timer will reset when a new
script is loaded and pause when the script is paused.
Auto start:
When set to ‘On’ the script will start scrolling automatically, when set to ‘Off’ the script must be
started using the on-screen menu, hardware or network remote control.
Start delay:
Optionally set a delay (in seconds) between the start command being issued and text starting to
scroll (work with manual start and auto start).
Screenshot Enabled:
Enables or disabled the screenshots used for remote monitoring via the web interface.
Screenshot Delay (ms):
The time in milliseconds a screenshot is taken and send to the network web
interface for remote monitoring, a lower value will result in less delay but higher CPU and network usage.
Lower values will require faster hardware.
Break marker:
You can also set up text characters like *# that indicate a break in the scrolled text called
break markers. These markers can then be used to quickly jump forward or backward between points in the
text, when using the hardware or network remote control, should the running order of the production change.
Remote control:
The optional Datavideo WR-500 controller can be used to control the script, please select
either Bluetooth or wired mode.
Webui Access:
All optionally features are already unlocked on the TP-700.
