ENG & FREESTANDING TELEPROMPTER KIT TP-700
13
Assembly
– Freestanding configuration
1. Use the hand screws
item C,
to secure the lower
part of the ENG Prompter Frame
item B
in place
using the counter sunk holes in the freestanding
rail
item AA
.
Note:
There should be two holes left free in front
of this mounting position for the Glass frame.
2. There are four adhesive Velcro straps packed
inside the Snood/Hood,
item I
. Peel off the white
paper backing before applying these straps to the
Glass Frame,
item G
.
Apply the two long Velcro strips to the Glass
Frame edges on the Left side and Right side. Then
apply the two smaller Velcro strips to the Bottom
Left and Right sides of the Glass Frame edge.
Be careful not to cover any screws and keep
them straight.
