10
9. DC IN
DC in socket connects the supplied 12V / 19W PSU. The
connection can be secured by screwing the outer fastening
ring of the DC In plug to the socket.
10. Grounding Terminal
When connecting this unit to any other component, make
sure that it is properly grounded by connecting this
terminal to an appropriate point. When connecting, use the
socket and be sure to use wire with a cross-sectional area
of at least 1.0 mm
2
.
2.2 Front Panel
Power Switch
Turns the device ON/OFF
2.3 Software Control UI
The SE-500 MU’s Software Control User Interface is designed for the user to operate, configure and
control the switcher. The Software Control UI can be opened on any Windows system so as to allow
the user to operate the SE-500 MU just like any other physical switcher keyboard.
2.3.1 Installation
Before installing the User Interface, the user should first download the latest software from the
Datavideo SE-500 MU product page by visiting
www.datavideo.com
.
Extract the zip file to an easily accessible location.
In the extracted folder, locate the executable file called
se500MuControl.exe
.
Double click this .exe file to launch the
Software Control User Interface
as shown below.
